Clean the back of the tile first. If the stains, floating layer and residual release powder on the back of the tiles are not cleaned up, it is easy to gather and fail to form a film after the adhesive is applied. Special reminder, the cleaned tiles can only be painted with adhesive after they are dry.

When applying one-component tile adhesive, apply as full and thin as possible. If the adhesive is missed when applying the adhesive, hollowing is likely to occur locally. The thicker the adhesive is, the better it is, but it should be applied as thinly as possible under the premise of full coating, so that the drying speed is faster and there will be no uneven drying.

Do not add water to the one-component tile adhesive. Adding water will dilute the adhesive and reduce the original polymer content, which will seriously affect the quality of the adhesive. After use, it will easily lead to problems such as polycondensation and sagging during construction.

It is not allowed to add cement and tile adhesive to one-component tile adhesive. It is not an additive. Although tile adhesive and cement have good compatibility, it cannot be added to tile adhesive. If you want to strengthen the cement mortar Performance, you can add strong mortar glue, which can effectively improve the water retention and bonding performance of cement mortar.

One-component tile adhesives cannot be directly applied to the wall, but only to the back of the tiles. One-component tile adhesives form a continuous film of highly flexible polymers, which cannot penetrate and reinforce the wall. Therefore, one-component tile adhesives are only suitable for strengthening the back of tiles to improve the adhesion of tile materials and tiles. the bonding effect.