There are two kinds of materials commonly used for laying tiles: one is tile adhesive, and the other is the auxiliary paste material tile adhesive, which can also be called tile back glue. The tile adhesive itself is an emulsion-like auxiliary material, so how do we use the tile adhesive correctly?

Here is the wrong use of tile adhesive

1. Before the tile adhesive is applied, the back of the tile is not fully cleaned;

2. The construction is not in accordance with the product description standard (the air is not aired);

3. Add water to dilute the tile adhesive or add other solvents;

4. Failure to do any maintenance and protection as required after the completion of construction, subject to collision, extrusion, pollution, rain, etc.;

5. The construction temperature is too high or too low.

Here’s How to Use the Correct Tile Adhesive

1. Clean the back of the tiles. Release agents, dust, oil, etc. will directly affect the effect of the tile adhesive.

2. Open the barrel and use it without adding any materials. Use a roller brush to brush the tile adhesive on the back of the clean tile and wait for it to dry.

3. After construction, pay attention to take protective measures to prevent being affected by external forces or human factors, weather factors, etc. After the tile adhesive is completely dry, you can scrape the tile adhesive on the wall

Tile adhesive has always been the “golden partner” of tile adhesives. Strong adhesion, good water resistance, used with high-quality tile adhesive, truly worry-free tiling!